HP B-series Fabric OS 6.3.2e Release Notes (5697-1816, March 2012) - includes all 6.3.2x versions

• HP 400 Multiprotocol Router (Brocade 7500)

• HP Encryption SAN Switch (Brocade BES)

• HP DC04 SAN Director (Brocade DCX-4S)

• HP DC SAN Backbone Director (Brocade DCX)

• HP SAN Director 16 Port 8Gb FC Blade (Brocade FC8-16)

• HP SAN Director 32 Port 8Gb FC Blade (Brocade FC8-32)

• HP SAN Director 48 Port 8Gb FC Blade (Brocade FC8-48)

• HP SAN Director 6 Port 10Gb FC ISL Blade (Brocade FC10-6)

• HP DC Switch Encryption FC Blade (Brocade FS8-18)

• HP EVA4400 Embedded Switch Module (Brocade 5410)

• Brocade 8Gb SAN Switch for HP BladeSystem c-Class (Brocade 5480)

• HP 1606 Extension SAN Switch (Brocade 7800)

• HP 2408 FCoE Converged Network Switch (Brocade 8000)

• HP DC SAN Director Switch 10/24 FCoE Blade (Brocade FCOE10-24)

• HP DC SAN Director Multiprotocol Extension Blade (Brocade FX8-24)

Unsupported product models

Any product models not listed in Supported product models (page 9) do not support Fabric OS

6.3.x.

Devices supported

For a list of supported devices, see the HP website:

http://www.hp.com/go/san

Operating systems

For a list of operating systems, see the HP website:

http://www.hp.com/go/san

Access Gateway support

Access Gateway is supported with Fabric OS 6.3.x for the following HP products only:

• Brocade 8Gb SAN Switch for HP BladeSystem c-Class (Brocade 5480)

• HP 8/24 SAN Switch (Brocade 300)

• HP 8/40 SAN Switch (Brocade 5100)

• HP 2408 FCoE Converfed Network Switch (Brocade 8000)

IMPORTANT: Although the 8/8 SAN Switch uses the same hardware as the 8/24 SAN Switch,

it does not support Access Gateway because only the 8/24 switch has all ports licensed as required

for Access Gateway support. Similarly, for the 8/40 switch to support Access Gateway mode, all

ports must be licensed. If you are using DCFM to manage a fabric with a 2408 FCoE switch in

Access Gateway mode, version 10.4.0 or later is required.