HP B-series Fabric OS 6.3.2e Release Notes (5697-1816, March 2012) - includes all 6.3.2x versions

NOTE: Do not configure zoning through a switch operating with Fabric OS 3.x in a fabric that
has products operating with later versions of Fabric OS.
Prerequisites
Table 1 (page 13) lists the supported Fabric OS firmware versions. HP recommends using the latest
supported firmware versions to get the greatest benefit from the SAN.
For a list of retired products, see the HP website:
http://www.hp.com
IMPORTANT: The Fabric OS versions listed in the Earliest compatible version column in
Table 1 (page 13) are the earliest versions supported by HP for connection to switches running
Fabric OS 6.3.2e at the time of its release.
Versions shown as supported in Table 1 (page 13) reflect support as of the date of the publication
of these release notes. For the latest product support information, see the Single Point of Connectivity
Knowledge (SPOCK) on the HP website: http://www.hp.com/storage/spock. You must sign up
for an HP Passport to access this website.
12