HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

Fabric OS 6.x administrator guide 315
Correcting device login issues
Perform the following steps to try to pinpoint problems with device logins.
1. Log in to the switch as admin.
2. Enter the switchShow command; then, check for correct logins:
switch:admin> switchshow
switchName: Dazzler
switchType: 26.1
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:05:1e:34:00:70
zoning: OFF
switchBeacon: OFF
Area Port Media Speed State Proto
=====================================
0 0 id AN Port_Flt
1 1 id N2 Online F-Port 21:00:00:e0:8b:13:08:10
2 2 id N2 No_Light
3 3 -- N2 No_Module
4 4 -- N2 No_Module
5 5 id N2 No_Light
6 6 -- N2 No_Module
7 7 -- N2 No_Module
8 8 id N2 No_Light
9 9 id N2 No_Light
10 10 -- N2 No_Module
11 11 -- N2 No_Module
12 12 -- N2 No_Module
13 13 -- N2 No_Module
14 14 id N2 Online F-Port 21:00:00:e0:8b:12:8a:be
15 15 id N2 Online E-Port segmented,(No Fabric License)
switch:admin>
3. Enter the portCfgShow command to see if the port is configured correctly:
switch:admin> portcfgshow
Ports of Slot 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-----------------+--+--+--+--+----+--+--+--+----+--+--+--+----+--+--+--
Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN
Trunk Port ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
Long Distance .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
VC Link Init .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Locked L_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Locked G_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Disabled E_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..