HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, December 2009)

Fabric OS 6.1.x administrator guide 265
Automatic iSCSI VT creation
An iSCSI VT is created using target LUNs from the attached FC network. LUNs are mapped to iSCSI VTs by
creating unique iSCSI Qualified Names (IQNs) for each target.
You can create iSCSI VTs by issuing the iscsiCfg --easycreate tgt command. There are two
options.
• An iSCSI VT may be created for every FC target. IQNs are created automatically, using the port
WWNs as the user defined portion of the IQN.
• A port WWN may be specified to create one ISCSI VT with all LUNs for that FC target. The WWN of
the FC target is used as the user defined portion of the IQN.
Generating iSCSI VTs for every FC target
1. Connect and log in to the switch.
2. Issue the iscsiCfg --easycreate tgt command with no options.
The command returns a prompt indicating that this could be a long running operation.
3. Enter y or yes to continue.
IQNs are created. The default value of iqn.2002-12.com.brocade is used for the prefix unless it
has been changed by issuing the iscsiSwCfg --modifygw -t <tgtname> command. The port
WWN is used as the user-defined portion of the IQN.
For example: