HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251

0HVVDJH([SODQDWLRQVDQG$FWLRQV
100
Printing
disabled→
The printer cannot print, because of errors previously notified.
Press ↓
to continue. Then press the Replace Ink System key to replace the
erroneous ink systems in order to print with your printer again. See 74, If You
Have Problems Reseating a Printhead.
Pull ↓
Align ↔ edges to roll
You are aligning roll media.
Grasp the left and right free edges of the roll media and pull them towards you
until the media is taut. At the same time, align the left and right edges of the
media so that they are flush with the left and right edges of the roll.
Reload media There was an error loading the media and the printer has ejected it. The printer
is waiting for you to reload the media.
Reload the media.
Reload sheet Sheet media was loaded skewed and the printer ejected it.
Reload the sheet.
Remove all
ink cartridge(s)
You have selected the option
Utilities / Transport mode of the front-panel
menu, and opened the left door when instructed.
The printer is instructing you to remove all the ink cartridges.
Remove all
printheads
You have selected the option Utilities / Transport mode of the front-panel
menu, and lifted the window when instructed.
The printer is instructing you to remove all the printheads.
0HVVDJH ([SODQDWLRQDQG$ FWLRQ
qrgbook.bk.fm Page 100 Tuesday, July 28, 1998 5:31 PM