HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251

0HVVDJH([SODQDWLRQVDQG$FWLRQV
108
STATUS
Check pending
The right door has been opened while the printer was busy (for example,
printing) and the printer is waiting to check the ink system. You may have done
something that will affect image print quality.
Do not open any door or window on the printer when not instructed and it is
busy.
STATUS
Checking ink system
The printer is verifying that the ink system was correctly installed, or that all the
components are present after any door or window on the printer has been
opened.
Wait until the check is complete.
STATUS
Checking media
The printer is checking to see if media is correctly positioned with respect to the
perforated line of the entry platen.
Wait until the check is complete.
STATUS
Checking printheads
The printer is printing a pattern to test the printheads.
Wait until the check is complete.
STATUS
Creating pattern
The printer is performing an accuracy calibration.
Wait until the calibration is complete.
STATUS
Head cleaner(s) full
One or more of the printhead cleaners are full of ink. The printer will continue
printing but image print quality may be affected, and ink may leak inside the
printer and damage it.
Press the
Replace Ink System key to replace the ink systems affected. See 74,
If You Have Problems Reseating a Printhead.
Message Explanation and Action
qrgbook.bk.fm Page 108 Tuesday, July 28, 1998 5:31 PM