HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251
0HVVDJH([SODQDWLRQVDQG$FWLRQV
110
STATUS
Maintenance advised
The printer is being used more intensively than the recommended duty cycle.
You should contact your local HP dealer or HP service engineer to arrange a
service. If you choose to ignore the message, you may continue to use the printer
as normal, but may encounter a number of operational or print-quality
problems.
STATUS
Measuring pattern
The printer is measuring the accuracy calibration print that you just loaded.
Wait for the calibration to complete.
STATUS
Out of media
The printer has received a file, is ready to print, but has no media loaded.
Load appropriate media.
STATUS
Pause pending
You have pressed the
Pause key but the printer was busy performing a previous
action. The printer will pause when it has completed its current action.
Wait for the current action to complete.
STATUS
Paused
You have pressed the Pause key. The printer will remain paused until you press
the
Pause key again.
Press the Pause key again when you are ready.
STATUS
Printing
The printer is printing.
Wait for the printing to complete.
STATUS
Printing (Special)
The printer is printing with a special print mode controlled by your software
rather than by the printer.
Wait for the printing to complete.
Message Explanation and Action
qrgbook.bk.fm Page 110 Tuesday, July 28, 1998 5:31 PM