HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251

Solving Ink System Problems

35,17+($'817,/7+(35,17 (5+$6$&&(37('7+(&855(17

21(

If the lights continue flashing and the printheads have been inserted correctly,

try reseating them a few more times, by removing the printhead from its stall

and then replacing it until it snaps correctly into position.

NOTE: Do not leave printheads partly inserted in the carriage; they may be

making electrical contact and be the cause of the reseating problem, as you try

to reseat other printheads.

If the printer still refuses to accept your printheads, try replacing the indicated

ink system (see 74, If You Have Problems Reseating a Printhead) or call HP for

assistance.

qrgbook.bk.fm Page 75 Tuesday, July 28, 1998 5:31 PM