HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251
0HVVDJH([SODQDWLRQVDQG$FWLRQV
82
Check ink system→
Ignore→
After an error has been detected in the ink system, you are given the chance to
check it.
Press ↑ to check the ink system right now. The printer will indicate which ink
systems are affected.
Press ↓ to ignore the error and continue printing. In this case the image quality
cannot be assured.
To fix any errors, see the check-lists in 68, Checking Ink Systems.
Check printheads
■■❏■ Abort →
The printer has detected an error in the printheads indicated by the empty
squares. The printhead can be replaced, but you should replace all components
of the failing ink systems as soon as possible.
Reseat (do not replace) the indicated printheads or press the ↓ key to terminate
the procedure. In this case, you will not be able to print, and you may later
resume checking the ink system by pressing the Replace Ink System button. (If
you have persistent problems, see page 74, If You Have Problems Reseating a
Printhead.
Close left door to
continue
You opened the left door while the printer was busy, or you have finished
installing the ink cartridges.
Close the left door to continue.
Close roll cover
Continue→
Rewind the media to take up any slack in the roll, close the roll cover, then
press ↓ to continue.
0HVVDJH ([SODQDWLRQDQG$ FWLRQ
qrgbook.bk.fm Page 82 Tuesday, July 28, 1998 5:31 PM