HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251
0HVVDJH([SODQDWLRQVDQG$FWLRQV
84
Head cleaner full
■■❏■→
Either: After finishing printing, the printer has detected that one or more of the
printhead cleaners are full of ink. The squares that are flashing indicate the
head cleaners that are full.
Press ↓ to continue. The message “Check ink system→ / Ignore→” is
displayed. If you press ↓ again to continue, you may still be able to print again,
but the ink in the head cleaner may overflow and the print quality of your
images may be affected. To fix the problem, select
↑ to check the ink system;
see 74, If You Have Problems Reseating a Printhead.
Or: In the ink system replacement process, one or more of the printhead
cleaners have not been replaced at the same time as the corresponding
printheads. The squares that are flashing indicate the head cleaners that are full.
Press ↓ to continue. You may still be able to print again, but image print
quality may be affected, as indicated by a subsequent message. See 74, If You
Have Problems Reseating a Printhead.
Head cleaner ink may
overflow→
One or more of the printhead cleaners are full of ink, and the ink may overflow.
Press ↓ to continue. Image print quality may be affected, and ink may leak
inside the printer and damage it. Replacement of the ink systems affected is
recommended. To fix problems with the ink system, see 74, If You Have
Problems Reseating a Printhead.
0HVVDJH ([SODQDWLRQDQG$FWLRQ
qrgbook.bk.fm Page 84 Tuesday, July 28, 1998 5:31 PM