HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251

Message Explanations and Actions
85
Head cleaner removed
■■❏■→
The printer has detected that one or more printhead cleaners have
become
dislodged or the printer cannot detect them
, as indicated by the flashing
squares. Printing is disabled.
Press ↓ to check the failing head cleaner. You should reseat the head cleaners
immediately; see 70, Checking the Printhead Cleaners. If this does not solve
the problem, you will have to replace the entire ink system (printhead,
printhead cleaner, and ink cartridge) using the Replace Ink System key.
If you don’t correct the error now, you will see the status message “Ink
system error” described on page 89.
Image quality not
assured→
This message appears after the printer finds an error in the ink system. One or
more of the ink systems have passed their specified life, one or more of the
printhead cleaners are full of ink, or one or more of the printheads has failed an
electrical test, or an alignment or nozzle check.
Press ↓ to continue. You may continue printing, but you may not get your usual
image print quality. To fix problems, see 74, If You Have Problems Reseating a
Printhead.
0HVVDJH ([SODQDWLRQDQG$FWLRQ
qrgbook.bk.fm Page 85 Tuesday, July 28, 1998 5:31 PM