HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251
0HVVDJH([SODQDWLRQVDQG$FWLRQV
86
Imaging inks YES→
installed NO→
After you have finished installing a new ink cartridge, you are asked to confirm
that you have changed the type of ink cartridges from UV Pigmented to
Imaging.
Press ↑ to confirm that you have changed the ink cartridges from UV
Pigmented to Imaging.
Press ↓ to indicate that you have not changed the ink cartridges from UV
Pigmented to Imaging. You will then be given the opportunity of replacing the
incorrect ink cartridges by the correct ones.
Incorrect ink system
■■❏■→
After you used the Replace Ink System procedure, which was cancelled by a
time-out or aborted (see
,I<RX+DYH3UREOHPV5HVHDWLQJD3ULQWKHDG),
the printer has detected that one or more of the ink systems are still faulty or
have not been fully replaced, as indicated by the flashing squares. This
message also appears if the printer believes that a component is incorrect; you
must then confirm that the ink system is indeed correct, or rectify the error.
Press ↓ to continue
, to replace the ink systems. Printing will be disabled. You
should replace the faulty ink systems immediately; see page 74, If You Have
Problems Reseating a Printhead.
If you don’t correct the error now, you will see the status message “Ink
system error” described on page 89.
0HVVDJH ([SODQDWLRQDQG$FWLRQ
qrgbook.bk.fm Page 86 Tuesday, July 28, 1998 5:31 PM