HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251

Message Explanations and Actions
91
Lower window
to continue
The window was opened while the printer was busy.
Close the window to continue.
Media too small You may have sent a print file that is too large for the media loaded; the print
may be clipped.
Press Cancel if the media is unsuitable, and reload with appropriate media.
Media too small for
calibration→
The media you loaded for printhead alignment or a printhead check is too
small. The procedure has been cancelled. You may continue printing without
calibrating the printer, but the image quality is not assured.
Press ↓ to continue. If you want to complete the interrupted procedure, reload
with appropriate media (A3-size paper or larger, in landscape orientation) and
redo the procedure:
•Use Image quality / Printhead service / Align now for printhead
alignment.
•Use Image quality / Printhead service / Printheads check / Now for a
printhead check.
MIO error
Communication break
The flow of data from the computer to the printer stopped prematurely (for
example, the computer may have been shut down before all data was sent).
Press Enter to clear the message from the front panel display.
0HVVDJH ([SODQDWLRQDQG$FWLRQ
qrgbook.bk.fm Page 91 Tuesday, July 28, 1998 5:31 PM