HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251
0HVVDJH([SODQDWLRQVDQG$FWLRQV
92
MIO error handshake You configured the modular interface incorrectly.
Press the
Enter key to clear the message from the front panel. Check the
handshake settings in the printer’s front panel, in the hardware configuration,
and in your application software configuration to make sure they are
compatible with one another.
Mispositioned
Reload roll
The roll media is mispositioned.
Remove and reload the roll.
Mispositioned
Reload sheet
The sheet media is mispositioned.
Remove and reload the sheet.
MISSING INK SYSTEM
Install→
One or more ink systems are missing.
Press ↓
or the Replace Ink System key to install the ink systems in order to
print with your printer.
Mixed ink system
❏■■■→
At power-on or after the ink systems have been serviced, the printer has
detected components of different ink system types (for example, Imaging and
UV Pigmented). Printing will be disabled until the ink systems are all of the
same type. The flashing squares indicate which ink systems need checking.
The error may be because
the printhead, printhead cleaner and ink cartridge
within an ink system are not all of the same type (UV Pigmented or
Imaging) or that entire ink systems are of different types.
Press ↓ to continue, to check the ink systems. See 74, If You Have Problems
Reseating a Printhead.
0HVVDJH ([SODQDWLRQDQG$FWLRQ
qrgbook.bk.fm Page 92 Tuesday, July 28, 1998 5:31 PM