HP DesignJet 2500 and 2000CP Printer Quick Reference Guide - C4704-90251
0HVVDJH([SODQDWLRQVDQG$FWLRQV
94
Open window to
access printheads
You are doing an ink system replacement.
Open the window to access the printheads.
OUT OF INK
■■■❏ →
The printer has detected that the amount of ink in the ink systems indicated
by one or more flashing squares, is below acceptable limits for satisfactory
printing.
Press ↓ to check the indicated ink systems. See 74, If You Have Problems
Reseating a Printhead. You will be prompted to change the kit or to ignore the
error and continue printing. If there is still a large amount of ink remaining in
the ink cartridges, see
the message Printhead failure on page 99.
Out of memory
Data was lost
The current file is too large for the printer’s memory; the printer has run out of
disk space for processing the file.
To print files of this size, you may need to install more memory to your printer.
Press ENTER when
done
The printer is waiting for you to confirm an action or selection.
When you have taken the appropriate action press the
Enter key.
0HVVDJH ([SODQDWLRQDQG$FWLRQ
qrgbook.bk.fm Page 94 Tuesday, July 28, 1998 5:31 PM