HP DesignJet 2500/2000CP Printer - User's Guide

Troubleshooting

Solving Media-Handling Problems

11-30

The Cutter is Jammed

n Switch the printer off.

n Open the window.

n With you finger and thumb carefully pinch together the cutter assembly plates

(1) and move it to the left (2).

n If the paper needs to be removed from the printer because it is damaged, perform

part of the procedure described on page 3-30, Removing a Roll from the Printer.

A Sheet is Ejected when You Switch On the Printer

n The printer is doing an automatic calibration check. Wait for the STATUS /

Ready message and then reload the sheet.

C472378