488CA Printer - User's Guide

5–11

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 5–11 (seq: 103)

This is the black on page 5–11 (seq: 103)

The part headed To check the cartridge alignment lets you check and, if

necessary, adjust the alignment between the cartridges, in response to a print

quality problem—see page 9–12.

You don’t need to use both parts of the Color Cartridge Test Sheet each time you

print it.

4 Follow the instructions on the sheet. Notice that, if you change any of the settings

on the sheet (by marking an oval different from the currently selected onesthose

indicated by thicker edges to the ovals), you must reload it, as as explained in steps

5 through 7, for the printer to readjust itself. Otherwise you can skip the rest of the

steps.

5 Having marked the appropriate ovals, reverse the sheet as indicated, and reload it.

6 When the

Ready light comes on, press Setup.

The printer now reads your marks and adjusts itself automatically.

7 When the

Load Media light comes on again, remove the sheet and make sure that

the printer has marked your selections with a check mark.

450C/

488CA

INTERNAL

PRINTS

Special internal prints

Using the Color Cartridge Test Sheet

Localization Note.

SETUP

READY

This is the green on page 5–11

(seq: 103)

LOAD MEDIA

This is the green on page 5–11

(seq: 103)