488CA Printer - User's Guide

6–2

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 6–2 (seq: 110)

This is the black on page 6–2 (seq: 110)

To see the current configuration of the printer

To see the current configuration of your printer, print the Setup Sheet, as explained

on page 1–19. Those items on the Setup Sheet which you may change are listed on

page 1–22, together with their defaults. They are explained in the relevant chapters

of this manual, for example Page Size in chapter 3 and Graphics Language in this

chapter.

The following three items, which appear near the top right-hand corner of the

Setup Sheet, tell you the overall configuration of the printer.

Item Comments

RAM This is the size, in megabytes, of the printer’s main standard

memory, plus the amount of memory reserved for printing.

D This does not correspond directly to the size of your files on

the computer, as explained on page 6–4.

D This is the total RAM, not the RAM currently free.

SIMM This tells you if an optional memory expansion module is

installed in the printer, and its size.

Firmware

Revision

This is the revision number of the printer’s internal code.

Localization Note.

Reconfiguring the printer

To see the current configuration of the printer