488CA Printer - User's Guide

430

6–7

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 6–7 (seq: 115)

This is the black on page 6–7 (seq: 115)

b Holding it only by the edges, carefully pull the top of the module toward you

and lift it out.

4 Temporarily place the module on a conductive pad, for example the one containing

the new SIMM.

5 Take the new SIMM out of its bag, holding it only by the edges.

6 With the SIMM’s small notch on the left and the metallic edge away from you,

load the SIMM into the slot furthest from you. To do this, first hold the module at

an angle, place the bottom edge in the slot and then push the top away from you

until the module clicks into place.

Slot furthest from you

7 If you removed a memory module from the slot nearest to you, re-install it in the

same way.

Reconfiguring your printer

To upgrade the HP DesignJet 430 with color

RECONFIG–

6 URATION

Localization Note.