488CA Printer - User's Guide

430

6–9

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 6–9 (seq: 117)

This is the black on page 6–9 (seq: 117)

10 Move the cartridge carriage out of the service station. Then remove the cover from

the three left-hand cartridge slots by first squeezing on both sides, and then lifting

it off.

11 Remove the cover from the three left-hand cartridge selectors.

a Release the clip on the right side of the cover, at the bottom. This is easiest to

see when looking down into the printer.

b Lift the cover off.

Reconfiguring your printer

To upgrade the HP DesignJet 430 with color

RECONFIG–

6 URATION

Localization Note.