488CA Printer - User's Guide

Green

7–8 (seq: 126)

450C/488CA

This is the yellow on page 7–8 (seq: 126)

This is the magenta on page 7–8 (seq: 126)

This is the cyan on page 7–8 (seq: 126)

450C/488CA

7–8

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 7–8 (seq: 126)

This is the black on page 7–8 (seq: 126)

3 Press the small colored selector in front of the cartridge which you want to prime.

4 Firmly press the large colored plunger fully down once, and then release it.

The plunger should return to its original position.

5 Repeat steps 3 and 4 for any other cartridges to be primed.

Note. It is not necessary to return the selectors to their original positions.

6 Lower the cover.

7 If you interrupted the print, the printer now resumes it. Ignoring that part of the

drawing immediately after the interruption (where print quality cannot be

guaranteed), check the rest of the print to see if the problem has been resolved.

Maintaining your printer

Cleaning the cartridge nozzles (priming)

Localization Note.