HP DesignJet 430/450C/488CA Printer - User's Guide

8–3
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 8–3 (seq: 131)
This is the black on page 8–3 (seq: 131)
Lights Explanation and Action
The printer is not ready to print.
Check the state of the other lights and
look them up in this table.
If all the status group lights are off, check
that the media lever is raised and that the
printer’s cover is closed.
The printer is ready to print.
Send your print from your computer or, for
a special internal print, press the
appropriate key combination—see
Chapter 5.
READY light flashing: The printer is busy
with a task or is receiving a file.
Wait.
If the flashing READY light is
accompanied by one of the four media
type lights flashing, the printer is waiting
for the media to dry.
This can be terminated by pressing Form
Feed.
You are loading media and need to realign
it.
Lower the media lever, realign the media,
and raise the media lever.
See also page 2–14 for sheet media,
or page 2–22 for roll media.
The printer is ready, but you need to load
media.
When you are ready to print, load media.
READY light off
Status group
READY
FRONT-PANEL
8
Localization Note.
Front-panel lights
This is the green on page 8–3
(seq: 131)
READY
PAPER
This is the green on page 8–3
(seq: 131)
ALIGN MEDIA
This is the green on page 8–3
(seq: 131)
LOAD MEDIA
This is the green on page 8–3
(seq: 131)