HP DesignJet 430/450C/488CA Printer - User's Guide

8–4
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 8–4 (seq: 132)
This is the black on page 8–4 (seq: 132)
Lights Explanation and Action
The printer has a file in memory, which it
is waiting to print, but no media is loaded.
Load media.
Either: one of the color or black print
cartridges is faulty, misplaced or missing.
     
   
Or: you have loaded a print cartridge of
the wrong type for this printer.
For the correct part numbers of the
cartridges supported by this printer, see
page 10–19.
Either: the current print is too large for the
printer’s memory.
Look on your computer screen for any
error message: some drivers, for example
the Microsoft Windows driver supplied
with your printer, allow you to choose a
different printing mode and try to send the
file again. In the case of the Microsoft
Windows 95 driver shipped with the
printer, the relevant field is called “Process
document” in the Options dialog box.
Otherwise, you may need to install more
memory to print this print. For information
on available memory expansion modules,
see page 10–18.
Or: there is a problem with the serial
interface.
The printer’s settings for baud rate and
parity must be the same as those of the
computer sending the data.
LOAD MEDIA
This is the green on page 8–4
(seq: 132)
Status group
(continued)
CARTRIDGES
Localization Note.
Front-panel lights
This is the red on page 8–4 (seq: 132)
Error Group
DATA