HP DesignJet 430/450C/488CA Printer - User's Guide

8–5
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 8–5 (seq: 133)
This is the black on page 8–5 (seq: 133)
Lights Explanation and Action
Either: the sheet you loaded is
misaligned.
Realign it as explained on page 2–14. A
short tutorial on loading media starts on
page 2–9.
Or: it is an invalid size.
For supported media sizes, see page
10–3.
Or: the media lever is lowered.
Raise the lever.
Or: the cover is open when the printer is
initializing.
Lower the cover.
The error group lights are used in conjunction with the front-panel CANCEL key
and are summarized in the following table.
Lights Explanation and Action
If all the Error Group lights are flashing
on the front panel, there is a system error.
Press the CANCEL key.
If the lights stop flashing this is
recoverable. If they don’t, there is a
nonrecoverable error.
You need to contact Hewlett-Packard for
support.
Refer to Chapter 6, “Troubleshooting”.
If all the Error Group lights are on but not
flashing on the front panel, there is a
recoverable error.
The way to resolve this problem is to
switch the printer off and then on again.
If any of the green
Status Group lights
are also on, make a note of which ones
and refer to Chapter 6, “Troubleshooting”.
MEDIA
This is the red on page 8–5 (seq: 133)
Front-panel lights
FRONT-PANEL
8
CARTRIDGES
DATA
MEDIA
Error
Group
CARTRIDGES
DATA
MEDIA
Error
Group
Status
Group