488CA Printer - User's Guide

This is the magenta on page 9–11 (seq: 147)

9–11

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 9–11 (seq: 147)

This is the black on page 9–11 (seq: 147)

If the output is distorted or unintelligible

There is a possible explanation if the serial interface is in use:

If you are using a serial interface between the printer and your computer, make

sure the printer’s serial interface settings match the settings and requirements of

your software and hardware. To check or change the printer’s settings, use the

Setup Sheet.

If the printer has drawn a different print from the one you were

expecting

You may have pressed Reprint (giving you a copy of the last print) or may have

accidentally initiated one of the printer’s internal prints. (For a summary of these

prints and how to print them, see Chapter 5.)

If pen settings seem to have no effect

You may have changed them in the Setup Sheet but forgotten to fill in the oval

called “Use settings from tables below”.

You may expect the software-driven pen settings but the Setup Sheet is set to

“Use settings from tables below”.

Localization Note.

TROUBLE–

SHOOTING

Troubleshooting

Solving problems with print position or content