HP DesignJet 430/450C/488CA Printer - User's Guide

10–3
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 10–3 (seq: 157)
This is the black on page 10–3 (seq: 157)
Functional specifications (continued)
Supported
di i
Width (carriage axis) Length (paper axis)
me
di
a s
i
zes
Minimum Maximum Minimum Maximum
210 mm (8.3 in) E/A0-size printer:
917 mm (36.1 in)
210 mm (8.3 in) Sheet:
1.625 m (64 in)
D/A1-size printer:
625 mm (24.6 in)
Maximum length
of long-axis print
on roll media:
15.2 m (50 ft)
Margins
For printing area
(media size minus
margins), see
Leading edge:
Trailing edge:
Sides:
17 mm (0.67 in)
17 mm (0.67 in)
5 mm (0.2 in)
margins)
,
see
page 10–7
All measurements 2 mm (0.08 in).
Resolution
1
On Setup Sheet, if Color/Mono is set to:
Print color as grayscale Print color as color
Fast print quality:
Other print qualities:
150 x 300 dpi.
600 x 600 dpi.
2
All print qualities: 300 x 300 dpi.
Accuracy
(maximum
accumulated error)
0.38 mm (0.015 in) or 0.2% of the specified vector length, whichever is greater,
at 23_C (73_F), 50–60% relative humidity, on HP Matte Film.
Programming
languages
supported
HP-GL (7586B), HP-GL/2, HP RTL, PJL
1
The 600 dpi resolution specified is addressable resolution, that is, it refers to the smallest movement
the print head can make between dots rather than to the size of the dot.
2
Except for glossy media types, on which the resolution is always 300 dpi.
Reference
Printer specifications
REFERENCE
10
Localization Note.
450C/488CA