HP DesignJet 430/450C/488CA Printer - User's Guide
10–13
Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open
This is the blue on page 10–13 (seq: 167)
This is the black on page 10–13 (seq: 167)
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try and correct the interferences by one or more of the following measures:
Reorient the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
The user may find useful the following booklet prepared by the FCC: “How to
Identify and Resolve RadioTV Interference Problems.” This booklet is available
from the US Government Printing Office, Washington, DC 20402, Stock No.
004
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a commercial
environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at their own expense.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la classe B prescrites dans le
Règlement sur le Brouillage Radioélectrique édicté par le ministère des
Communications du Canada.
Connecté à un réseau par des accessoires de serveur, l’appareil n’émet pas de bruits
radioélectriques dépassant les limites applicables aux appareils numériques de
Classe A prescrites dans le réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
When connected to LAN cables using print server accessories, this digital
apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Localization Note.
REFERENCE
10
When connected to
LAN cables using
print server
accessories...
REFERENCE
10
Reference
Regulatory notices
Normes de
sécurité (Canada)
REFERENCE
10
DOC statement
(Canada)