488CA Printer - User's Guide

1–4

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–4 (seq: 20)

This is the black on page 1–4 (seq: 20)

Task 1: Check that you have all the items required

1 You will need the following items, which were supplied with the printer:

Power cord

The power cord supplied with your printer should meet the plug requirements

for your area. However, different power cords (international options) are

available. If necessary, contact your dealer or HP Sales and Support Office.

Print cartridge(s)

For the HP DesignJet 430:

– One black (HP part number 51640A).

For the HP DesignJet 450C and 488CA:

– One yellow (HP part number 51644Y)

– One cyan (HP part number 51644C)

– One magenta (HP part number 51644M)

– One black (HP part number 51640A).

Software

The following two software packs were supplied with the printer. Whether you

need them depends on what application(s) you intend to use.

– Driver for AutoCAD

– Driver for Microsoft Windows applications.

Media deflector extensions

The deflector extensions should already have been fitted as part of the assembly

of your printer (see the the Printer unpacking and assembly instructions).

2 Inspect the printer itself and the above accessories. If you received any item in a

damaged condition, notify the dealer or HP Sales and Support Office where you

purchased the printer, and file a claim with the carrier.

Localization Note.

Setting up your printer

Task 1: Check that you have all the items required

Supplied

430

450C/

488CA