488CA Printer - User's Guide

1–5

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 1–5 (seq: 21)

This is the black on page 1–5 (seq: 21)

3 You will also need the following items, which were not supplied with the printer:

Interface cable

For details of suitable cables, see page 10–11. Note that the cable is supplied

with the HP DesignJet 488CA printer.

Media

For details of supported media types, see page 2–3. As part of the setup routine,

you may need up to three A-size or A4-size sheets, plus whatever size sheet you

prefer for a sample print.

If you have fitted the optional roll-feed assembly, you can use either roll media

or cut sheets; if not, you can use only cut sheets.

4 If you have bought one, you will also need your:

Memory expansion module

For details of the memory expansion modules available, see page 10–18.

HP JetDirect EX print server

This is required if you intend to connect your printer directly to a network. For

details of the latest HP JetDirect EX products, contact your local HP Sales and

Support Office. For configuration details, see page 1–18.

Note that the HP JetDirect EX print server is supplied with the HP DesignJet

488CA printer; you can find detailed information about it on the compact disk

supplied with the HP DesignJet 488CA printer.

Localization Note.

SETUP

Setting up your printer

Task 1: Check that you have all the items required

Not supplied

Optional

488CA