488CA Printer - User's Guide

1–6

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–6 (seq: 22)

This is the black on page 1–6 (seq: 22)

Task 2: (Optional) Install a memory expansion module

For details of the memory modules available, see page 10–18. You may install

only one.

1 Make sure that the printer is switched OFF and that neither the power cord nor an

interface cable is connected.

2 Unscrew the cover plate at the back of the printer, and remove it.

Localization Note.

Setting up your printer

Task 2: (Optional) Install a memory expansion module