488CA Printer - User's Guide

1–10

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–10 (seq: 26)

This is the black on page 1–10 (seq: 26)

Task 5: Load the print cartridge(s)

1 Make sure that, on the front panel, the Cartridges light is flashing. If other lights

in the upper part (the status and error groups) are on, look up their meaning in

Chapter 8. Any lights in the lower part of the panel (the print quality, media type

and media source groups) are not relevant at this stage.

2 Open the cover using the small handle at the center front. If necessary, wait for the

cartridge carriage to move to the service station (the area on the left of the printer).

Cartridge carriage

in service station

450C/

430

488CA

Don’t touch the plastic strip that runs the length of the printer behind the

cartridge carriage. Keep hair, jewelry, clothing, and foreign objects away

from the printer mechanisms.

Localization Note.

Setting up your printer

Task 5: Load the print cartridge(s)

CARTRIDGES

This is the red on page 1–10 (seq: 26)

WARNING