488CA Printer - User's Guide

This is the yellow on page 1–11 (seq: 27)

This is the magenta on page 1–11 (seq: 27)

This is the cyan on page 1–11 (seq: 27)

430

450C/488CA

1–11

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 1–11 (seq: 27)

This is the black on page 1–11 (seq: 27)

A set of cartridges was supplied with the printer:

The HP DesignJet 430 is supplied with one black cartridge.

The HP DesignJet 450C and 488CA are supplied with four cartridges:

– yellow

– cyan

– magenta

– black.

For the 450C and 488CA, each stall in the carriage has a dot indicating the color of

the cartridge that should be installed: you must put the correct cartridge in the

correct stall. The sequence of the stall colors is, from left to right, yellow, cyan,

magenta and black.

Yellow

Cyan

Magenta

Black

For users with color-vision deficiencies. You can also identify the colors of the

cartridges by the part numbers on the boxes—see page 10–19.

Note. It is not recommended to operate the 450C or 488CA with only the black

cartridge loaded.

Localization Note.

SETUP

Setting up your printer

Task 5: Load the print cartridge(s)