488CA Printer - User's Guide

This is the yellow on page 1–12 (seq: 28)

This is the magenta on page 1–12 (seq: 28)

This is the cyan on page 1–12 (seq: 28)

450C/488CA

1–12

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–12 (seq: 28)

This is the black on page 1–12 (seq: 28)

3 For each cartridge in the set:

a Take the cartridge out of its box.

b Remove the colored protective tape and tab from the cartridge’s nozzles.

c For the 450C and 488CA, match the color of the cartridge’s label with the color

of the dot above the stall.

d Make sure that the printer is still switched ON. (Never install cartridges with

the printer switched off.)

e Insert the cartridge in the stall. Press down lightly and push the cartridge away

from you until it snaps into place.

Yellow

Cyan

Magenta

Black

430

450C/

488CA

f If it is installed correctly, the Ready light flashes three times. Otherwise,

re-seat it.

Localization Note.

Setting up your printer

Task 5: Load the print cartridge(s)