488CA Printer - User's Guide

1–13

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 1–13 (seq: 29)

This is the black on page 1–13 (seq: 29)

4 When all the cartridges are installed, lower the cover. On the front panel, the

Ready light should flash for up to about a minute and then go off. The Load

Media

light should then be on (together with Media Type and Print Quality lights).

5 Now check your cartridge alignment by running the Black Cartridge Alignment

Routine (see page 5–4) and the Color Cartridge Test Routine (see page 5–8).

Localization Note.

SETUP

Setting up your printer

Task 5: Load the print cartridge(s)

This is the green on page 1–13

(seq: 29)

READY

LOAD MEDIA

Print Quality

lights

Media Type