488CA Printer - User's Guide

1–14

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–14 (seq: 30)

This is the black on page 1–14 (seq: 30)

Task 6: (Optional) Change the language

All the printer’s internal prints are available in the following languages: English,

French, Italian, German, Spanish, Portuguese and Japanese. By default, the

language is English. If English is what you want, then you can skip this task and

go to task 7.

To change from English to any of the other languages, you must use the printer’s

Setup Sheet, as explained below.

1 Load a sheet of A-size or A4-size plain paper, in portrait orientation. For help on

how to load a sheet, either refer to the pictures on the right-hand side of the

printer’s media-entry slot, or see the section starting on page 2–9. Don’t forget to

check that the Media Source is set to

Sheet.

When the

Ready light is on, you have loaded the sheet correctly.

Print will be on underside

Localization Note.

Setting up your printer

Task 6: (Optional) Change the language