488CA Printer - User's Guide

1. Language

Português

Italiano

Español

Deutsch

Français

English

1–16

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–16 (seq: 32)

This is the black on page 1–16 (seq: 32)

5 The print is a Setup Sheet in English, as shown

on page 1–21.

You can ignore all the information except the

box in the top left, headed “1. Language”.

Take a pencil or black pen and fill in the oval

next to the language you want.

6 Reload the Setup Sheet into the printer, printed side down and with the large arrow

pointing into the printer.

When the

Ready light comes on,

press Setup again.

The printer now reads your marks and

reconfigures itself automatically.

7 When the

Load Media light comes on again, remove the sheet and make sure that

the printer has marked your selection with a check mark. If it hasn’t marked the

correct language, repeat this task.

Localization Note.

Setting up your printer

Task 6: (Optional) Change the language

SETUP

READY

This is the green on page 1–16

(seq: 32)

LOAD MEDIA

This is the green on page 1–16

(seq: 32)