488CA Printer - User's Guide

1–18

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–18 (seq: 34)

This is the black on page 1–18 (seq: 34)

If you are connecting the printer directly to a network

You can connect your printer directly to a Local Area Network using an

HP JetDirect EX external network interface, connected to the printer’s parallel

port. Various network operating systems are supported, in DOS, Unixr and

Macintosh environments. For the latest information on HP JetDirect EX products,

contact your local HP Sales and Support office.

/488CA

For installation of the HP JetDirect EX interface with the DesignJet 430, 450C or

488CA, see the Installation Guide that comes with that product.

For installation of the DesignJet 488CA with the supplied HP JetDirect EX

interface, refer to the HP DesignJet 488CA Software RIP set-up guide.

In order to be able to print from your Macintosh to the HP DesignJet 430, 450 or

488CA you should contact your local HP Sales and Support office.

Localization Note.

Setting up your printer

Task 7: Connect the printer to your computer