488CA Printer - User's Guide

1–19

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 1–19 (seq: 35)

This is the black on page 1–19 (seq: 35)

Task 8: (Optional) Configure the printer

In the majority of cases, there is no need to change any of the printer’s default

settings. This may be because:

You prefer to change those settings that affect the appearance of your prints

from your application software.

The printer’s factory defaults, listed on page 1–22, are acceptable.

However, if you do want to change the defaults, follow these steps, which explain

how to print and use the Setup Sheet.

Note. If you changed the language from English (see task 6 above), you already

know how to use this sheet, but this time it will be in your chosen language.

1 Load a sheet of A-size or A4-size plain paper, in portrait orientation. For help on

how to load a sheet, either refer to the pictures on the right-hand side of the

printer’s media-entry slot, or see the section starting on page 2–9. Don’t forget to

check that the Media Source is set to

Sheet.

When the Ready light is on, you have loaded the sheet correctly.

Print will be on underside

C471307.

Localization Note.

SETUP

Setting up your printer

Task 8: (Optional) Configure the printer