488CA Printer - User's Guide

1–20

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–20 (seq: 36)

This is the black on page 1–20 (seq: 36)

2 Make sure the front-panel Media Type is set to Paper. If necessary, press the

Media Type key until the Paper light is on.

3 Press

Setup.

4 When the print has finished, wait until the Load Media light comes on and the

printer ejects the sheet. Remove the sheet.

Setting up your printer

Task 8: (Optional) Configure the printer

PAPER

MEDIA TYPE

This is the green on page 1–20

(seq: 36)

SETUP

This is the green on page 1–20

(seq: 36)

LOAD MEDIA

Localization Note.