488CA Printer - User's Guide

1–22

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–22 (seq: 38)

This is the black on page 1–22 (seq: 38)

An example of a Setup Sheet is shown on the previous page. That example is for

an E/A0-size printer. The items in the Setup Sheet are listed in the table below.

Setup Sheet Items and Defaults

Item

Factory

Default

Comments

Language English Task 6 on page 1–14 explained how to change

this.

Baud Rate 9600 (Serial interface only). You must set the baud

rate to be the same as that of the computer

sending the data.

Parity None (Serial interface only). You must set the parity to

be the same as that of the computer sending the

data.

Graphics

Language

HP-GL (7586B) See page 6–3.

I/O Timeout 30 minutes See page 6–4.

Rotate Off See page 3–7.

Mirror Off See page 3–10.

Merge Off See page 3–11.

Cutter Enabled For roll media only. See page 2–27.

Color/Mono Print color as

color

See page 3–13.

Page Size Software See page 3–5.

Note that not all the page-size options shown in

the example are available on the D-size printer.

Pen Settings Use settings

from software

See page 3–12.

Note that the color pen

settings are only available

on the HP DesignJet 450C

and 488CA.

Localization Note.

Setting up your printer

Task 8: (Optional) Configure the printer

450C/488CA