488CA Printer - User's Guide

1–23

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 1–23 (seq: 39)

This is the black on page 1–23 (seq: 39)

5 Follow the instructions on the Setup Sheet. Having marked the ovals to change the

settings, reload the sheet into the printer, with the printed side down, and with the

large arrow pointing into the printer.

When the

Ready light comes on,

press Setup again.

The printer now reads your marks and

reconfigures itself automatically.

6 When the

Load Media light comes on again, remove the sheet and make sure that

the printer has marked your selection with a check mark.

7 Please store this latest copy of the Setup Sheet with the Quick Reference Guide in

the plastic pocket at the side of the printer, so that a service engineer would know

the current configuration even if the printer is inoperable.

Localization Note.

SETUP

Setting up your printer

Task 8: (Optional) Configure the printer

SETUP

READY

This is the green on page 1–23

(seq: 39)

This is the green on page 1–23

(seq: 39)

LOAD MEDIA