HP DesignJet 430/450C/488CA Printer - User's Guide

430
450C/488CA
ii
Company confidential. Genie User’s Guide, Edition 2, First Draft Freeze Status: open
This is the blue on page ii (seq: 4)
This is the black on page ii (seq: 4)
This User’s Guide for the HP DesignJet 430, 450C and 488CA printers contains
the following types of information:
Setup
Use
Maintenance
Troubleshooting
Reference material.
To help with finding specific information, a comprehensive table of contents is
provided at the front and an alphabetical index is provided at the back.
You will notice the use of symbols in the left margin and shaded backgrounds to
the text. These are used to identify different types of information as follows:
Information specific only to the HP DesignJet 430 is shown like this.
Information specific only to the HP DesignJet 450C and 488CA is shown like
this.
All other information is applicable to all printers.
The accompanying Quick Reference Guide contains selected information to help
with everyday use of the printer. It is designed to be stored in the plastic pocket at
the side of the printer.
Where to find the most commonly needed information
To find how to ... Go to ...
Install the printer
"
Chapter 1
Connect the printer
"
Page 1–17
Configure the printer using the Setup Sheet
"
Page 1–19
Load media
"
Page 2–9
Set the print quality
"
Page 3–15
Check cartridge alignment
"
Chapter 5
Replace a cartridge
"
Page 7–2
Finding information