488CA Printer - User's Guide

1–25

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 1–25 (seq: 41)

This is the black on page 1–25 (seq: 41)

When choosing from a device list, follow these preferences, which are listed here

in priority sequence.

Preference 1: HP DesignJet 430/450C/455CA/488CA

Preference 2: HP DesignJet 330/350C

Preference 3: HP DesignJet 700/750C/750C Plus/755CM

Preference 4: HP DesignJet 650C

with a preference for C2858B/C2859B rather than

C2858A/C2859A.

Preference 5: HP DesignJet 220

Preference 6: HP DesignJet 200

Preference 7: HP DesignJet 600

HP DesignJet

Preference 8: HP-GL/2 Device

or a similar option including a reference to HP-GL/2.

Preference 9: Any of:

HP 7595B DraftMaster SX

HP 7596B DraftMaster RX

HP 7599A DraftMaster MX

HP 7595C DraftMaster SX Plus

HP 7596C DraftMaster RX Plus

HP 7599B DraftMaster MX Plus

If any of the options quoted above appears, then your software supports HP-GL/2.

If it doesn’t support HP-GL/2, then go to Preference 10.

Preference 10: HP 7586B

This printer supports HP-GL. However, if you choose this

device you may not be able to use your printer’s parallel

connection—depending on the application software.

Getting help

If in doubt, or if you have problems with your driver, refer to the section at the end

of Chapter 9 for advice on how to get help. See page iv for information about

Hewlett-Packard’s web site for DesignJet printers.

Localization Note.

SETUP

Setting up your printer

Task 9: Set up the printer in your application software