488CA Printer - User's Guide

488CA

1–26

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 1–26 (seq: 42)

This is the black on page 1–26 (seq: 42)

Task 10: Send a sample or demonstration print

To verify a successful configuration, choose a sample print in your application and

try to print it on the printer.

In case of problems, refer in this manual to Chapter 9, “Troubleshooting”. To test

whether the source of any problem is in the printer itself or in the link with your

application, it is useful to print the printer’s internal demonstration print.

To print the demonstration print

1 If media is not already loaded, load roll media or a sheet, as explained in

Chapter 2, which also provides advice on the availability and use of different

media types.

2 Press simultaneously the two keys Setup and Cancel:

The demonstration print summarizes the printer’s main features and includes a

sample CAD drawing, using a variety of line widths and colors. It is printed in the

language currently configured in the Setup Sheet. To change the language, see task

The demonstration print of the HP DesignJet 488CA must be printed from the HP

DesignJet 488CA software RIP. Please refer to the documentation supplied with

this pack.

Localization Note.

Setting up your printer

Task 10: Send a sample or demonstration print

SETUP FORM FEED CANCELREPRINT