488CA Printer - User's Guide

450C/

488CA

2–5

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 2–5 (seq: 47)

This is the black on page 2–5 (seq: 47)

Recommended print-quality settings and recommended media

for color prints

Print quality

(set either on the front panel

or in the software)

HP media Fast Normal Best

HP Bright White Inkjet Paper OK for monochrome,

but color for CAD drawings only

HP Translucent Bond OK for monochrome,

not recommended for color

HP Natural Tracing Paper OK for monochrome,

b t l f CAD d i l

HP Vellum

ut co

CAD

raw

ngs on

HP Coated Paper OK

HP Heavyweight Coated Paper

HP Matte Film

HP Clear Film

HP High-Gloss White Film Not

recommended

OK for color;

not recommended for

HP High-Gloss Photo Paper

recommended

not

recommended

for

monochrome

The limitation on the use of non-coated media for color really depends on:

D the amount of area fill in your drawing (the more there is, the less likely that

the print quality on opaque bond will be satisfactory)

D the quality of the media.

Working with media

Choosing media

MEDIA

Localization Note.