488CA Printer - User's Guide

2–8

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 2–8 (seq: 50)

This is the black on page 2–8 (seq: 50)

Before sending your file

1 Specify the media type

Press the

Media Type key until the light comes on against the name of the media

type you are going to load. For an explanation of which media type category on

the front panel should be used for each supported media type, see the table on page

2–3.

Note that, if your software printer driver allows you to specify the media type, you

must specify it correctly there as well.

2 Specify the print quality setting

Press the

Print Quality key until the light comes on against the print quality setting

you require.

For details of each print quality setting, see the table on page 3–15.

Alternatively, you may be able to specify the print quality setting from your

software printer driver. In this case, the driver’s setting is used for the next print.

During the print, the front-panel setting changes temporarily to that from the

driver, and then resumes its previous setting again.

Working with media

Before sending your file

MEDIA TYPE

PAPER

FILM

COATED

GLOSSY

Localization Note.

PRINT QUALITY

FAST

NORMAL

BEST