488CA Printer - User's Guide

2–9

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 2–9 (seq: 51)

This is the black on page 2–9 (seq: 51)

Loading sheet media

To load a sheet (without the roll-feed option installed)

To learn how to load a sheet correctly first time, follow steps 1 through 9. For

subsequent help on how to load a sheet, refer to the pictures on the right-hand side

of the printer’s media-entry slot.

When you load a sheet, the printer checks that it is correctly aligned. If it is not

correctly aligned, the printer flashes an error on the front panel, as explained in

step 10 below, and you must try again. If your alignment is almost correct, you

have a chance to re-align it, as explained on page 2–14.

1 If your printer has no legs, you’ll find it easier if it is positioned at the edge of the

table.

2 Make sure that the cover is closed and that the media lever is raised.

media lever

3 On the front panel, make sure the Sheet light is on, to indicate that you are going

to load a sheet. Select Sheet by pressing the Media Source button.

MEDIA

Working with media

Loading sheet media

Localization Note.

SHEET

MEDIA SOURCE

This is the green on page 2–9

(seq: 51)