488CA Printer - User's Guide

2–13

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 2–13 (seq: 55)

This is the black on page 2–13 (seq: 55)

Alignment close. Either realign the sheet

manually, as explained in the next section, or

press

Cancel to start again from step 6 on page

2–10.

Or the

Media light starts flashing:

Alignment bad. The printer has rejected the

sheet. Simply remove it and start again from step

6 on page 2–10. (There’s no need to press any

key.)

There is another reason why the Media light may flash: the sheet may be an

invalid size. For supported media sizes, see page 10–3. With very small media

sizes (B/A3-loaded in landscape or A/A4-size loaded in any orientation), there’s

no middle option above: unless the alignment is good, you have to remove the

sheet and start again.

To realign the sheet manually (if necessary)

1 If the Align Media light is flashing, the printer is inviting you to realign the media

manually.

2 Lower the media lever to release the media.

MEDIA

This is the red on page 2–13 (seq: 55)

MEDIA

Localization Note.

Working with media

Realigning sheet media

ALIGN MEDIA

This is the green on page 2–13 (seq: 55)