488CA Printer - User's Guide

2–17

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 2–17 (seq: 59)

This is the black on page 2–17 (seq: 59)

3 Remove the old roll by pulling firmly first on the left end of the spindle and then

on the right. You may find that you have to push your thumbs against the cover of

the roll-feed assembly while pulling the roll with your fingers to be able to release

the spindle.

If the new roll is on a different spindle, then you can skip steps 4 and 5, and go

straight to step 6.

4 Remove the left media stop, and then remove the roll from the spindle, with the

right media stop still connected to the spindle.

Working with media

Loading roll media

MEDIA

Localization Note.