488CA Printer - User's Guide

2–19

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 2–19 (seq: 61)

This is the black on page 2–19 (seq: 61)

To feed roll media into the printer

1 Make sure that the cover is closed and that the media lever is raised.

media lever

2 On the front panel, make sure the Roll light is on, to indicate that you are going to

load a roll. Select

Roll by pressing the Media Source button.

3 Which side down? As you load the roll, it is the underside on which the printer

will print. With most media types, the two sides are different and so it is important

to load the media correctly. See the table on page 2–4.

4 If the leading edge of the roll is uneven, you may find it easier to load if you trim it

now, for example with scissors.

MEDIA

Working with media

Loading roll media

Localization Note.

ROLL

MEDIA SOURCE

This is the green on page 2–19

(seq: 61)